Our experience shows that up to 90% of all disinfection work in medical facilities can carried out with sodium hypochlorite solution.
• Disposable medical devices before disposal (syringes, catheters, spatulas, etc.).
• General (current and preventive), final disinfection;
• Medical products made of glass, polymeric materials, rubber, corrosion-resistant metals;
• Crockery, linen, catering;
• Sanitary equipment;
• The surfaces of the premises (floor, walls and furniture).
• Cleaning equipment.
The ECO-50 installation is simple and convenient in operation and can recommended for the production of disinfectant solution both in medical institutions and in the social sphere: baths, catering and trade enterprises, and the production of meat and dairy products.
Sodium hypochlorite produced at the ECO-50/10 unit belongs to class IV (the safest) low-hazard substances according to GOST 12.1.007.
• It is not mutagenic, carcinogenic and teratogenic.
• Does not cause allergic reactions.
• Does not accumulate in the human body.
• Does not cause resistant strains.
• Breaks down into salt and water.
Installation ECO-50 / 10- “KRONT has a wide spectrum of action:
• virucidal.
• fungicidal.
• bactericidal, including against mycobacterium tuberculosis.
It is possible to prepare a disinfectant solution as necessary.
• Not dependent on the supply of purchased disinfectants.
• A backup disinfectant is always available.
The principle of operation of the installation
The principle of operation of the installation is based on the electrochemical method of obtaining a solution of sodium hypochlorite by placing electrolysis cells in a solution of sodium chloride and passing a direct current through them (operating voltage of 12 V cells is safe for humans).
Under the influence of direct electric current, the electrolysis cell synthesizes sodium hypochlorite (NaOCl) from water and sodium chloride (Н2О + NaCl). The cell consists of 5 titanium electrodes coated with ruthenium oxide.
The installation works in automatic mode with visual information: salt concentration, serviceability of cells, operating time. It shuts off automatically at the end of the work cycle. The power and control unit monitors the technical condition of the installation and the personnel's compliance with the technology for preparing sodium hypochlorite; there is no need for constant monitoring of the operation of the installation.
To reduce the deposits of hardness salts on electrolysis cells, it recommended to use high-quality evaporated salt without impurities with a sodium chloride content of NaCl of at least 99.5% and / or distilled water.
The installation can operated in any premises with an electric network, natural or forced ventilation. Operation of the installation does not require special training and education of personnel.
